Numerical control tool handle use precautions, maintenance points

CNC tool handle is an important part of CNC machine tool, its quality and use will directly affect the stability of the machine tool and processing efficiency. Therefore, in the use of CNC tool handle, you need to pay attention to some precautions, and maintenance. The following from the use of precautions and maintenance points are described in two aspects.

First, use precautions

1. Use it correctly

CNC tool handle should be selected according to the machine requirements of the correct size and model, and must be fully matched with such tools. In use, the operating specifications of CNC machine tools should be followed to avoid excessive loading or excessive acceleration, so as not to cause mechanical damage to the machine tool and the damage of the tool handle.

2. Overload is strictly prohibited

CNC tool handle is an important part of the connection between the tool and the spindle, which is responsible for transferring the cutting force, so it must be maintained under normal conditions. Overload or position deviation may lead to falling off or breakage and endanger the safety of the machine.

3. Good repeatability

It is required that the NC tool handle has good repeatability to ensure the standardized cutting operation of the tool. Therefore, it is necessary to use a special device for clamping the handle, and professional measuring tools should be used to check the accuracy and avoid the accumulation of errors.

4. Rust proof storage

CNC tool handles are precision mechanical devices whose surfaces are prone to corrosion and oxidation. Therefore, appropriate anti-rust storage measures must be taken, such as spraying with anti-rust agents to avoid the corrosion of water and oil, and should not be placed in a humid environment.

Two, maintenance points

Step 1 Clean

Before using the CNC tool handle, the surface should be cleaned with detergent, especially where the lower part of the tool handle contacts the holder. After using the CNC tool handle, the surface should also be cleaned in time to ensure its normal service life.

Step 2 Lubricate

The tool handle is equipped with the necessary lubrication device, and the appropriate amount of lubricating oil should be added regularly to maintain the normal state. At regular intervals, inspection and cleaning should be carried out to ensure smooth lubrication of the device.

3. Get regular checkups

Whether the CNC tool handle reaches the best execution state needs to be checked regularly before each use. Common checks include residual cooling liquid, torque size, stick clamping force, etc., to ensure the safety and performance of CNC tool handles.

4. Pay attention to moisture

Numerical control tool handle is easy to be affected by moisture, which causes harm to it. Therefore, storage should avoid a humid environment, and regular cleaning, to keep it dry and clean.

In short, the correct use method and a more comprehensive maintenance program can indeed extend the service life of the CNC tool handle, and can also effectively improve the efficiency of the machine tool. I hope the above analysis can be helpful to customers.