How to use tungsten steel milling cutter

Tungsten steel milling cutter is a common tool, is used for milling processing tools, because of its high hardness named. Tungsten steel milling cutter is widely used in various industrial fields, such as aviation, automotive, medical equipment, electronics, machinery and other industries.

The use of tungsten steel milling cutter is similar to the ordinary milling cutter, but the tungsten steel milling cutter is relatively more fine and has higher technical requirements.

1. Preparation

Before using tungsten steel milling cutter, the following preparations need to be made:

1, choose the right milling machine: according to the shape, size, accuracy and other requirements of the processing object, choose the right milling machine.

2, choose the right tool: according to the material, hardness, shape, size and other requirements of the processing object, choose the right tool.

3, check whether the milling machine is normal: check whether the mechanical parts of the milling machine are working normally, such as the transmission system, lubrication system, cooling system, etc.

Second, work flow

1, fixed tool: open the milling machine cover, put the tool into the tool holder, according to the fixing method, with the clamp, bolts and other ways to fix the tool on the tool holder, pay attention to the rear distance, tool length is standard and accurate, in order to prevent collision.

2, adjust the tool position: adjust the tool according to the need to the appropriate position and Angle, fine tuning.

3, adjust the milling amount: adjust the milling amount to the required thickness.

4, start the milling machine: open the milling machine, according to the requirements to adjust the milling machine speed, feed speed, milling depth and other parameters.

5, processing: according to the processing plan to start processing, pay attention to the control of cutting speed, feed speed, cutting depth and cutting Angle and other parameters in the processing process.

6, check: when the processing is completed, repeatedly check whether the product meets the technical requirements, dimensional accuracy, flatness, surface quality, etc., to check the milling quality.

7, cleaning: clean the milling machine tool holder, cutting tools and milling scraps, chips, keep the working environment clean, must not give up the process and details because of the rush of time.

Third, precautions

1, reasonable use: the use of tungsten steel milling cutter should be in accordance with the operating procedures and use requirements of the operation, appropriate control of cutting force, to avoid processing overload.

2, cutting fluid: do not ignore the use of cutting fluid, timely add cutting fluid to ensure the quality and service life of the tool.

3, pay attention to the carrying capacity of the tool: according to the hardness of the processing material and the depth of milling to choose the appropriate tungsten steel milling cutter, in order to avoid increasing the difficulty of processing, but also cause damage to the tool.

4, maintenance and maintenance: tungsten steel milling cutter maintenance and maintenance is also very important, in the operation process should pay attention to the cutting fluid circulation, cutting fluid condition, cutting amount, tool running state, tool installation and other details, must not be careless.

In short, when using tungsten steel milling cutter, it is necessary to make full preparation work, use the tool in accordance with the correct operating steps, pay attention to the details in the processing process, and carry out thorough cleaning and maintenance after the processing is completed to ensure the quality and life of the tool, and achieve higher processing efficiency and better processing quality.